Aadithya Logo

Surge Protection System

SPD Design, Supply & Installation

4 Standards Compliant
8+ Industries
Full Lifecycle
Overview

Advanced Engineering Solutions

Transient overvoltages caused by lightning strikes, switching operations, and other electrical disturbances pose a serious threat to sensitive electronic equipment and electrical infrastructure. A properly designed and installed Surge Protection System is essential to mitigate these risks.

Aadithya offers end-to-end surge protection solutions — from risk assessment and system design to supply, installation, and commissioning of SPDs across power, data, signal, and instrumentation lines.

Understanding Transients

FUNDAMENTALCONCEPT

A transient overvoltage (surge) is a short-duration spike in electrical voltage that can reach thousands of volts above normal operating levels. Sources include direct or nearby lightning strikes, utility grid switching, motor start/stop events, and capacitor bank switching. These surges can destroy equipment instantly or degrade it over time, causing unplanned downtime and costly replacements.

Our Offerings
Type 1 SPD

Type 1 SPD

Installed at the main distribution board, Type 1 SPDs safely discharge high-energy, direct lightning currents (10/350µs waveform). They are a mandatory requirement for facilities equipped with an external lightning protection system.

Type 2 SPD

Type 2 SPD

Deployed at sub-distribution panels, Type 2 SPDs serve as the primary defense against indirect lightning strikes and internal switching surges (8/20µs waveform), effectively clamping residual overvoltages to safe levels.

Type 3 SPD

Type 3 SPD

Installed directly at the point of use, Type 3 SPDs provide highly sensitive, fine-tuned protection for delicate electronic equipment, computers, and instrumentation, neutralizing any minor transients that bypass upstream protection.

Signal & Data SPD

Signal & Data SPD

Specialized surge arresters engineered to protect sensitive, low-voltage communication networks. They ensure data integrity and prevent catastrophic hardware damage across Ethernet, RS-485, telecom, and critical instrumentation lines.

Key Advantages
01
SPDs designed in compliance with IS/IEC 61643-11 (Power) and IS/IEC 61643-21 (Data & Signal).
02
Coordinated protection system — Types 1, 2, and 3 — ensuring full zone-of-protection coverage.
03
Protection for Power, Signal, Instrumentation, Ethernet, and Telecom lines.
04
Type-tested and certified SPD products.
05
Energy coordination between SPD types to prevent back-surges.
06
Detailed installation drawings, commissioning reports, and compliance documentation.

Standards

IS/IEC 61643-11
IS/IEC 61643-21
IS/IEC 62305-4
IEC 60364-5-53

Industries

  • Industrial Plants & Factories
  • Commercial & High-Rise Buildings
  • Data Centers & IT Facilities
  • Hospitals & Medical Equipment
  • Solar & Wind Plants
  • Substations & Control Rooms
  • Oil & Gas Installations
  • Communication Towers

Delivery Model

1
Risk Assessment
2
SPD Design
3
Supply
4
Installation
5
Testing & Commissioning

Need Expert Help?

Our engineers are ready to design a robust surge protection system tailored to your needs.

Request Consultation

Ready to secure your infrastructure?

Contact Engineering Team